You have no items in your shopping cart
1. AR-1 Artist Rotor
We did our homework when developing the new, Edwards exclusive, AR-1 Artist Rotor. Seeking a balance between a responsive, free-blowing feel and wonderful, large bore tenor sound we tested countless rotor configurations and designs on the market. It wasn’t long until we realized what we wanted for the new T396 did not yet exist. The only option left was to develop our own rotor design. One that outperforms every other “conventional” rotor available in every way. All while feeling as if there is no rotor there at all.
2. Historically Crafted Tuning Slide Bow
“They don’t make them like they used to” is a cliché we are all familiar with. Sometimes the new way is to speed production and cut costs. And sometimes it is out of necessity because of generational knowledge loss. Over time, the new way becomes standard and accepted as just the way it is done. This is the case with many modern-day brass instruments… especially the tubing. In the past, every non-machined part of an instrument was formed out of sheet stock. A labor-intensive, time-consuming, and costly technique requiring a higher skill level than many possessed. Today, the industry standard is to form all tubing from a larger, thicker raw stock tubing. Why? It’s quicker, cheaper, and requires much less training to do well. While it is consistent, the question we wanted answered was “Is it better?”. We set out to test this by making a tuning slide crook that was hand formed and shaped entirely out of sheet stock. The learning curve was steep with a lot of variables to iron out, but the end result is a tuning slide that is more responsive, colorful, and tonally complex.
3. Scalloped Harmonic Bridge
Perhaps the single most important design element of the original T396 was the introduction of the patented (US Pat No 8,247,675) Harmonic Pillar System. For the first time, musicians were presented with a fixed instrument that could be “acoustically tuned” to meet their specific playing style, setting, and needs. Pivotal to this system was the Edwards exclusive Harmonic Bridge brace. Much more than just a place to put the Harmonic Pillars, the Harmonic Bridge is critical to the entire bell section bracing system. The new, scalloped version has been strategically lightened to reduce the central bell section weight, thus dramatically improving energy transference within the trombone.
Sometimes in life, we all need a little mystery. Among the advancements to the T396 design are a few proprietary improvements we’ve decided to keep to ourselves. And while we aren’t going to spotlight them, you will undoubtedly pick up on just that little something extra when you try the T396-AR for yourself. They make up that last 1% of greatness that can’t be explained on a spec sheet. That little sprinkle of something special that can’t be measured or quantified or, most importantly, copied. It’s our secret sauce or secret formula kept under lock and key. You can’t really blame us, everybody likes to have a secret or two.
Large (0.547") symphonic bore.
Rose brass handslide with nickel oversleeves.
Yellow brass handslide crook.
8.5 inch two piece yellow brass bell with unsoldered rim.
Single radius tuning slide.
Willson Rotax rotary valve.
Open "Minnick" wrap F attachment.
Rose & yellow brass F attachment construction.
Single radius F attachment tuning slide.
Harmonic Bridge and Harmonic Pillar system for customizing response and feel.
Case not included. Available separately
Mouthpiece not included.
was added to your shopping cart
Out of stock